Bit_Vector

Definition:

The Bit_Vector type is predefined in the Standard package as a standard one-dimensional array type with each element being of the Bit type.

Syntax:

type bit_vector is array (natural range <>) of bit;

Description

The Bit_vector type is an unconstrained vector of elements of the bit type. The size of a particular vector is specified during its declaration (see the example below). The way the vector elements are indexed depends on the defined range and can be either ascending or descending (see range).

Assignment to an object of the Bit_vector type can be performed in the same way as in case of any arrays, i.e. using single element assignments, concatenation, aggregates, slices or any combination of them.

Examples

Example 1

signal DataBus : Bit_vector(7 downto 0);
signal FlagC : Bit;
DataBus(0) <= '1';                           -- 1
DataBus <= '0' & "111000" & FlagC;           -- 2
DataBus <= ('0', others => '1');             -- 3
DataBus <= DataBus(6 downto 0) & DataBus(7); -- 4
DataBus <= "01110001";                       -- 5

There is one bit_vector defined in this example - DataBus. Its range is defined as descending, therefore the most significant bit will be DataBus(7). Line 1, marked in the comment field, illustrates assignment of a single element (bit). The line 2 shows typical use of concatenation. Note that both single bits, groups of bits (with double quotes!) and other signals (as long as their type is compatible) can be used. The line 3 demonstrates the use of aggregates. The line 4 illustrates how slices can be used together with concatenation. The value of DataBus will be rotated left in this example. Finally, in line 5 DataBus is assigned an explicit value, specified with double quotes.

Despite that each of the numbered lines above is correct, it would be illegal to put them together in one specification as shown above, due to the fact that bit_vector is an unresolved type and there can be only one assignment to an object of this type in an architecture.

Important Notes

· Logical values for objects of the Bit_vector type MUST be written in double quotes. Single elements, however, are of the bit type, therefore all values assigned to single elements are specified in single quotes.