Block Statement

Formal Definition

The block statement is a representation of design or hierarchy section, used for partitioning architecture into self-contained parts.

Simplified Syntax

block_label : block (optional_guard_condition)

   declarations

begin

   concurrent statements

end block block_label;

Description

The block statement is a way of grouping concurrent statements in an architecture. There are two main purposes for using blocks: to improve readability of the specification and to disable some signals by using the guard expression (see guard for details).

The main purpose of block statement is organizational only - introduction of a block does not directly affect the execution of a simulation model. For example, both the upper and lower sections of code in Example 1 will generate the same simulation results.

Each block must be assigned a label placed just before the block reserved word. The same label may be optionally repeated at the end of the block, right after the end block reserved words.

A block statement can be preceded by two optional parts: a header and a declarative part. The latter allows to introduce declarations of subprograms, types, subtypes, constants, signals, shared variables, files, aliases, components, attributes, configurations, disconnections, use clauses and groups (i.e. any of the declarations possible for an architecture). All declarations specified here are local to the block and are not visible outside it.

A block header may contain port and generic declarations (like in an entity), as well as so called port map and generic map declarations. The purpose of port map and generic map statements is to map signals and other objects declared outside of the block into the ports and generic parameters that have been declared inside of the block, respectively. This construct, however, has only a small practical importance. The Example 2 illustrates typical block declarations.

If an optional guard condition is specified at the beginning of the block then this block becomes a guarded block. See guard for details.

The statements part may contain any concurrent constructs allowed in an architecture. In particular, other block statements can be used here. This way, a kind of hierarchical structure can be introduced into a single architecture body.

Examples

Example 1

A1: OUT1 <= '1' after 5 ns;
LEVEL1 : block
begin
A2: OUT2 <= '1' after 5 ns;
A3: OUT3 <= '0' after 4 ns;
end block LEVEL1;
A1: OUT1 <= '1' after 5 ns;
A2: OUT2 <= '1' after 5 ns;
A3: OUT3 <= '0' after 4 ns;

Both pieces of code above will behave in exactly the same way during simulation - block construct only separates part of the code without adding any functionality.

Example 2

entity X_GATE is
generic (LongTime : Time; ShortTime : Time);
port (P1, P2, P3 : inout BIT);
end X_GATE;
architecture STRUCTURE of X_GATE is
-- global declarations of signal:
signal A, B : BIT;
begin
LEVEL1 : block
-- local declaration of generic parameters
generic (GB1, GB2 : Time);
-- local binding of generic parameters
generic map (GB1 => LongTime, GB2 => ShortTime);
-- local declaration of ports
port (PB1: in BIT; PB2 : inout BIT );
-- local binding of ports and signals
port map (PB1 => P1, PB2 => B);
-- local declarations:
constant Delay : Time := 1 ms;
signal S1 : BIT;
begin
   S1 <= PB1 after Delay;
   PB2 <= S1 after GB1, P1 after GB2;
end block LEVEL1;
end architecture STRUCTURE;

The signals PB1 and PB2 have here the same values as P1 and B (in port map statement), respectively, and the generics GB1 and GB2 (see generic map statement) have the same values as Long Time and Short Time, respectively. However, such assignment is redundant because a block may use any declarations of an entity, including generics and ports. The Example 2 is presented here only for illustration purpose of the block syntax.

Important Notes

· Guarded blocks are generally not synthesizable.

· Unguarded blocks are usually ignored by synthesis tools.

· It is strongly recommended NOT to use blocks in non-VITAL designs - the package Std_logic_1164 supports mechanisms and multiple value logic which make the reserved words bus, disconnect, guarded and register unnecessary. Also, instead of guarded blocks for modeling sequential behavior it is recommended to used clocked processes.

· VITAL specifications require the use of blocks.

· VHDL supports a more powerful mechanism of design partitioning which is called component instantiation. Component instantiation allows connecting a component reference in one entity with its declaration in another entity.